Serial interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (added link to Coder's_cable page) |
||
| Line 43: | Line 43: | ||
A SCIF loopback connection can be created to allow a Dreamcast to conduct and pass the SCIF test on the official Sega [[DC Checker]] diagnostics software by connecting pin 4 (RX2) to pin 5 (TXD) and connecting pin 6 (RTS) to pin 7 (CTS). | A SCIF loopback connection can be created to allow a Dreamcast to conduct and pass the SCIF test on the official Sega [[DC Checker]] diagnostics software by connecting pin 4 (RX2) to pin 5 (TXD) and connecting pin 6 (RTS) to pin 7 (CTS). | ||
The serial interface is used by the [[Coder's_cable]] | |||
{{DCWiki:Stub}} | {{DCWiki:Stub}} | ||
Revision as of 21:30, 3 July 2023
The Dreamcast has a serial interface on the back of the console used for several peripherals and for console debugging.
| Pin | Description |
|---|---|
| 1 | +5V |
| 2 | SCK |
| 3 | Ground |
| 4 | RX2 |
| 5 | TX2 |
| 6 | RTS |
| 7 | CTS |
| 8 | Ground |
| 9 | Reset |
| 10 | +3.3V |
A SCIF loopback connection can be created to allow a Dreamcast to conduct and pass the SCIF test on the official Sega DC Checker diagnostics software by connecting pin 4 (RX2) to pin 5 (TXD) and connecting pin 6 (RTS) to pin 7 (CTS).
The serial interface is used by the Coder's_cable
This page is a stub page. It needs to be expanded with more detail. If you know more information about this topic, please sign up and contribute to dreamcast.wiki!